- Home
- /
- Classic Series
- /
- Kroma Atelier Stella
Kroma Atelier Stella
Kroma Audio engineers have over 20 years of experience in developing high-end loudspeakers. They continuously strive for perfection and fidelity of the reproduction. So natural sounds and a perfect representation of the sound image. This principle is implemented down to the smallest detail. For example, the bass reflex tube is made by hand by musical instrument makers and the type of wood is chosen for sound.














Kroma Atelier Stella
Designed by Javier Millán
Driver Complement
Tweeter AMT (x1)
6,5 Paper Fiber mix (x3)
Specifications
Sensitivity: 90dB
Impedance: 4 Ohm
Frequency Response: 30Hz - 30kHz
Recommended Power: 30 - 300watts
Dimensions: 45.6in (H) x 17.7in (W) x 10.2in (L)
Weight: 99.2lbs per unit
Dimensions (Metric): 116cm (H) x 45cm (W) x 26cm (L)
Weight (Metric): 45kg per unit
– Full Krion cabinet.
– Tweeter: 1 x AMT Neodymium Ribbon.
– Mid woofers: 2 x 6.5″ units, Proprietary cone materials.
– Woofer: 1 x 6.5″ carbon fiber cone unit.
– Passive crossover network with high quality Mundorf components.
– Impedance: 8 Ohms.
– Sensitivity: 89 dB.
– Frequency response: 25 to 25k Hz.
– Resonance frequency: 25 Hz.
– Recommended power amplifier: >15W.
– Dimensions: 115cm high, 26cm wide, 45cm deep.
– Weight without packaging: 43 Kg.
The housing of all Kroma Atelier is made of Krion, a non-conductive and non-magnetic material that has a very high mass, so that there is little to no resonance from the housing itself. This ensures a very neutral behavior and natural sound.
Kroma Audio engineers have over 20 years of experience in developing high-end loudspeakers. They continuously strive for perfection and fidelity of the reproduction. So natural sounds and a perfect representation of the sound image. This principle is implemented down to the smallest detail. For example, the bass reflex tube is made by hand by musical instrument makers and the type of wood is chosen for sound.
Kroma loudspeakers are very efficient and easy to control. The average efficiency of a Kroma Audio loudspeaker is between 90dB and 92dB. Similarly for the Stella.
In addition, the resistance does not fall below 6.5Ohm. In short, an amplifier from 15 watts or bigger is recommended
Related Products
- Choosing a selection results in a full page refresh.
- Opens in a new window.